Page 80 - Manual_PGA_RZR_2020
P. 80

FOR THE LIFE




         OF YOUR RIDE








                                        AIR FILTERS
      MAINTENANCE                       Critical to engine performance and
                                        reliability. A clogged air filter can restrict
                 TIP                    air flow to the engine leading to reduced
                                        engine performance. Dirt and debris
                                        ingestion can damage the engine leading
                                        to reduced engine life or catastrophic
       BREAK-IN PERIOD                  failure. Polaris recommends changing
                                        the vehicle’s air filter at the specified
       The break-in period for your new   intervals outlined in the owner’s manual,
       RZR is the first 25 hours of     which may be shorter if your vehicle is
                                        subject to severe conditions.
       operation, or the time it takes to
       use the first two tanks of fuel. No
       single action on your part is as   BRAKE PADS
       important as a proper break-in
       period. Careful treatment of a new   Check your brakes if you are close to the
       engine will result in more efficient   recommended service interval, hear
                                        grinding when applying the brakes, your
       performance and longer life for the   vehicle is taking longer to stop or if you
       engine. Perform the listed       have to apply more pressure to your
       procedures carefully.            pedal to engage the brakes. Check the
                                        brake discs for signs of cracks,
                                        excessive corrosion or warping.
       NOTICE: Excessive heat build-up during the first   If the brake pads are contaminated with
       three hours of operation will damage   oils or grease (petroleum products), brake
       close-fitted engine parts. Do not operate at full
       throttle or high speeds for extended periods   pads have to be discarded and replaced.
       during the first three hours of use.  Discs need to be cleaned with brake
                                        cleaner or alcohol based cleaner only.
                                        HALF SHAFT
                                        Extreme elements can contribute to
                                        axle failure when grease escapes the
                                        joint. This usually occurs if the CV boot
                                        becomes compromised. Full
                                        replacement or part specific available.




             MAINTENANCE SCHEDULE


                       25 HRS/400 km              50 HRS/800 km               100 HRS/1600 km             150 HRS/2400 km                     200 HRS/3200 km
             BREAK-IN                                  6                       12                         18                                  24
             MAINTENANCE
                                                   MONTHS                      MONTHS                      MONTHS                               MONTHS
                        ENGINE OIL:           EXHAUST SYSTEM:                    ENGINE OIL:                 ENGINE OIL:
                            CHANGE             INSPECT & CLEAN                       CHANGE                      CHANGE
                                              INSPECT FOR LEAKAGE OR
                          GENERAL           CARBON BUILD UP AT JOINTS           DRIVE BELT:                    BATTERY:
                     LUBRICATION:         INSPECT & CLEAN SCREEN TYPE      INSPECT & ADJUST               TEST, CLEAN, &
              ALL FITTINGS, PIVOTS,                SPARK ARRESTOR             REPLACE AS NEEDED       CHECK FLUID LEVEL
                       CABLES, ETC.                                                                       REPLACE AS NEEDED
                                                      GENERAL                TRANSMISSION
                       AIR FILTER:               LUBRICATION:                        FLUID:                 DRIVE BELT:
                  INSPECT & CLEAN         ALL FITTINGS, PIVOTS,                      CHANGE           INSPECT & ADJUST
                     REPLACE AS NEEDED             CABLES, ETC.                                           REPLACE AS NEEDED
                                                                          EXHAUST SYSTEM:
                 EXHAUST SYSTEM:                    DRIVE BELT:             INSPECT & CLEAN                      TIRES:
                  INSPECT & CLEAN             INSPECT & ADJUST             INSPECT FOR LEAKAGE OR    INSPECT CONDITION
                 INSPECT FOR LEAKAGE OR                                 CARBON BUILD UP AT JOINTS           & PRESSURE
               CARBON BUILD UP AT JOINTS          REPLACE AS NEEDED
                                                                          INSPECT & CLEAN SCREEN
                 INSPECT & CLEAN SCREEN                                     TYPE SPARK ARRESTOR       EXHAUST SYSTEM:
                   TYPE SPARK ARRESTOR                                                                  INSPECT & CLEAN
                                                                                                      INSPECT FOR LEAKAGE OR
                                                                                                    CARBON BUILD UP AT JOINTS

                                                                                                      INSPECT & CLEAN SCREEN
     78                                                                                                 TYPE SPARK ARRESTOR
     78
   75   76   77   78   79   80   81   82   83   84   85