Page 41 - General Catalogo Acessorios 2022
P. 41
FOR THE LIFE LIMITS WITHOUT SACRIFICING PARTS & GARAGE
PARTS THAT PUSH THE
STRENGTH AND DURABILITY.
We build our products so anyone with the
OF YOUR RIDE right tools can maintain their vehicle.
MAINTENANCE DRIVE BELT MAINTENANCE
TIP AIR FILTER Polaris Engineered belts deliver unmatched performance for
MAINTENANCE
your off-road vehicle . Developed and tested on all our engines
for all environments and conditions . Check your belt for
A clogged air filter can restrict air delamination, hour glassing and glazing .
flow to the engine leading to
BREAK-IN PERIOD reduced engine performance, BREAK-IN PERIOD
engine life or catastrophic failure . • Use lower gear (if available) while varying speeds and avoid
The break-in period for your new wide open throttle for 8-16 km OIL & LUBRICANTS
GENERAL is the first 25 hours of • If no low gear is available, vary at moderate speeds while
operation, or the time it takes to avoiding wide open throttle for 80 km
use the first two tanks of fuel . No
single action on your part is as
important as a proper break-in OUR INVESTMENT YOUR ADVANTAGE
period . Careful treatment of a BRAKE PADS • 32,187 km of field testing • No clutch recalibration
new engine will result in more HD PARTS
efficient performance and longer Maintaining and/or replacing • Thousands of dyno hours • Less wear and tear due to heat
life for the engine . brakes are critical to the safety • 18+ months of development • Ensure maximum vehicle performance
and functionally of a vehicle . (13,000+ design hours) per belt • More time riding, less time wrenching
Brake pads should be checked
NOTICE: Excessive heat build-up during the for wear and oil or grease • 1,500+ vehicle validation hours • Produced in collaboration with
first three hours of operation will damage (petroleum products) • Collaboration with powertrain powertrain and clutch engineers to
close-fitted engine parts. Do not operate at contamination and brake discs and clutch engineers ensure a perfect fit, maximum
full throttle or high speeds for extended should be checked for cracks, performance and ultimate durability
periods during the first three hours of use. excessive corrosion or warping . SERVICE PARTS
OIL FILTER
HALF SHAFT BATTERY Change oil filters with every oil
change to provide the best engine
Check for tears and punctures in the To ensure a battery maintains its level of protection and keep the engine & TRAILERING CLEANERS
operating at peak performance .
boot, which can lead to CV joint wear charge when unused for extended periods of
that can contribute to axle failure . time or during freezing weather, the battery
should be connected to a suitable battery
charger . Be sure to check for corrosion from
the terminals to the ends of the cables .
FOLLOW RECOMMENDED SERVICE
INTERVALS IN THE OWNER'S MANUAL
MA I NTENANCE SCHEDULE
25 HRS / 400 km 50 HRS / 800 km 100 HRS / 1,600 km 150 HRS / 2,400 km 200 HRS / 3,200 km 250 HRS / 4,023 km 300 HRS / 4,828 km
BREAK-IN 6 12 18 24 30 36 CHECK YOUR
OWNER'S MANUAL
MAINTENANCE FOR ADDITIONAL
MONTHS MONTHS MONTHS MONTHS MONTHS MONTHS RECOMMENDED
SERVICE ITEMS
ENGINE OIL & EXHAUST SYSTEM: ENGINE OIL & ENGINE OIL & ENGINE OIL & ENGINE OIL & ENGINE OIL & AND VEHICLE-
OIL FILTER: INSPECT & CLEAN OIL FILTER: OIL FILTER: OIL FILTER: OIL FILTER: OIL FILTER: SPECIFIC TIMING
CHANGE INSPECT FOR LEAKAGE OR CHANGE CHANGE CHANGE CHANGE CHANGE
CARBON BUILD UP AT JOINTS
GENERAL INSPECT & CLEAN SCREEN DRIVE BELT: BATTERY: BRAKE PADS & FLUID: BATTERY: AIR FILTER:
LUBRICATION: TYPE SPARK ARRESTOR INSPECT & ADJUST TEST, CLEAN & INSPECT & CLEAN TEST, CLEAN & INSPECT & REPLACE
ALL FITTINGS, PIVOTS, REPLACE AS NEEDED CHECK FLUID LEVEL REPLACE BRAKE FLUID CHECK FLUID LEVEL AS NEEDED
CABLES, ETC. GENERAL REPLACE AS NEEDED REPLACE AS NEEDED REPLACE AS NEEDED
LUBRICATION: TRANSMISSION GEARCASE &
AIR FILTER: ALL FITTINGS, FLUID: DRIVE BELT: SPARK PLUGS: DRIVE BELT: TRANSMISSION:
INSPECT & REPLACE PIVOTS, CABLES, ETC. CHANGE INSPECT & ADJUST INSPECT INSPECT & ADJUST REPLACE FLUIDS
AS NEEDED REPLACE AS NEEDED REPLACE AS NEEDED REPLACE AS NEEDED
DRIVE BELT: AIR FILTER: EXHAUST SYSTEM:
EXHAUST SYSTEM: INSPECT & ADJUST INSPECT & REPLACE TIRES: AIR FILTER: GENERAL INSPECT & CLEAN
INSPECT & CLEAN REPLACE AS NEEDED AS NEEDED INSPECT CONDITION INSPECT & REPLACE LUBRICATION: INSPECT FOR LEAKAGE OR
INSPECT FOR LEAKAGE OR & PRESSURE AS NEEDED ALL FITTINGS, CARBON BUILD UP AT JOINTS
CARBON BUILD UP AT JOINTS EXHAUST SYSTEM: PIVOTS, CABLES, ETC.
EXHAUST SYSTEM: INSPECT & CLEAN SCREEN
INSPECT & CLEAN SCREEN INSPECT & CLEAN EXHAUST SYSTEM: TYPE SPARK ARRESTOR
TYPE SPARK ARRESTOR INSPECT FOR LEAKAGE OR INSPECT & CLEAN INSPECT & CLEAN EXHAUST SYSTEM:
CARBON BUILD UP AT JOINTS INSPECT FOR LEAKAGE OR INSPECT & CLEAN
CARBON BUILD UP AT JOINTS INSPECT FOR LEAKAGE OR INSPECT FOR LEAKAGE OR
INSPECT & CLEAN SCREEN CARBON BUILD UP AT JOINTS CARBON BUILD UP AT JOINTS
TYPE SPARK ARRESTOR INSPECT & CLEAN SCREEN INSPECT & CLEAN SCREEN
TYPE SPARK ARRESTOR
TYPE SPARK ARRESTOR INSPECT & CLEAN SCREEN
TYPE SPARK ARRESTOR
38 39