Page 98 - Polaris_Ranger_Catalogo_Acessorios_2019

ENGINEERED TO MAXIMIZE
THE LIFE OF YOUR RIDE PARTS & GARAGE

All Polaris fluids—from anti–freeze to brake fluid—are developed for your
vehicle. Trust the only fluids perfectly engineered for your needs.

DOT 4 BRAKE FLUID
Polaris DOT 4 Brake Fluid is a high-quality brake fluid
designed for use in Polaris hydraulic brakes. Superior
high-temp characteristics plus anti-corrosive additives OIL & LUBRICANTS
extend the life of brake system components and provide
consistent, positive braking.
» • 502081

ANTI–FREEZE
Polaris Extended Life Coolant contains organic acid MAINTENANCE
technologies to prevent corrosion on metal components,
eliminate scaling, and maximize cooling system performance.
» • 502103
» • 502271
» • 502091 & TRAILERING VEHICLE CARE

AGL
A proprietary blend of additives designed to optimize Polaris ®
ORV transmission life. Extreme pressure additives protect
gears, drive chain, and bearings from scoring and wear.
Unlike typical gear case oils, AGL’s unique viscosity range
allows instant flow and film protection in extreme cold or
high heat environments. NOTHING CAN STOP YOU.
» • 502080
COVERAGE WHEN YOU NEED IT.
» • 502151
» • 502152
- The ATV & UTV Trail Boot is a quick trail side x to increase your time spent on the trails.
- The exible and durable boot material expands over a cone tool for CV boot repairs, without
the need to
DEMAND DRIVE FLUID disassemble CV axles.
FIX ON THE GO | TEMPORARY COVERAGE
The Trail Boot is versatile and will work on most makes and models.
-
Engineered specifically for Polaris ORV front drive - All components t inside the cone, and a cover is provided for compact durable storage.
systems. Provides positive 4WD engagement in extreme - This kit ts well in a cargo box, attached to the roll cage, in the glovebox, or many other storage
cold or high heat conditions. Unique friction additives
protect internal components under heavy loads and UTV CV BOOT UTV TRAIL
promote positive engagement. CV BOOT ATV TRAIL BOOT INCLUDES PNXXXXXXX : UTV TRAIL BOOT INCLUDES PNXXXXXXX :
REPAIR KIT
BOOT ONLY
» • 502094 REPAIR KIT * (1) Expandable CV Boot » 2830527
The ATV & UTV Trail Boot is a quick trail side x to increase your time spent on the trails.
-
• Kit includes the following items:
(1) Expandable XL CV Boot
» • 502264 - The exible and durable boot material expands over a cone tool for CV boot repairs, without (1) Reusable Cone Tool (1) Reusable Cone Tool
the need to • (1) Expandable XL CV Boot
» • 502267 • A quick trail side fix to increase trail time. (2) CV Boot Clamps (2) CV Boot Clamps

disassemble CV axles.
• (1) Reusable Cone Tool
Proper lubricant application and timing will ensure - The Trail Boot is versatile and will work on most makes and models. (1) Tube of Silicone Lube ATV (1) Tube of Silicone Lube
• (2) CV Boot Clamps
• The flexible and durable boot material expands over a cone tool for (1) Grease Packet
-
All components t inside the cone, and a cover is provided for compact durable storage.
(1) Grease Packet
optimal vehicle performance. Please refer to your CV boot repairs, without disassembling CV axles. • (1) Tube of Silicone Lube » CV REPAIR KIT
- This kit ts well in a cargo box, attached to the roll cage, in the glovebox, or many other storage 2830528
owner’s manual for lubricant change interval schedules. • Universal fit – works as a temporary fix for most powersports axles. ATV TRAIL BOOT ONLY PNXXXXXXX : ATV TRAIL BOOT ONLY PNXXXXXXX :
• (1) Grease Packet
» TRAIL BOOT ONLY
• All components fit inside the cone, and a cover is provided for • (1) Cone Cover 2830529
UTV TRAIL BOOT INCLUDES PNXXXXXXX :
HOW TO INSTALL:
ATV TRAIL BOOT INCLUDES PNXXXXXXX :
compact durable storage.
(1) Expandable CV Boot (1) Expandable XL CV Boot 1 » 2830526 2 3
• Easily fits in a cargo box, attached to the roll cage, in the glovebox,
(1) Reusable Cone Tool
(1) Reusable Cone Tool
CARBON FUEL ANGLE DRIVE PREMIUM GAS or many other storage locations. (2) CV Boot Clamps
(2) CV Boot Clamps
CLEAN STABILIZER FLUID SHOCK OIL (1) Tube of Silicone Lube (1) Tube of Silicone Lube
(1) Grease Packet (1) Grease Packet Items shown are
Polaris Carbon Clean Fuel Stabilizer prevents » • 502089 » • 502098
prevents ethanol ethanol corrosion and contained inside cone
corrosion, stabilizes stabilizes fuel for up to » • 502268 ATV TRAIL BOOT ONLY PNXXXXXXX : ATV TRAIL BOOT ONLY PNXXXXXXX :
fuel, and cleans fuel 2 years. Dual- » • 502266
injectors, piston ring antioxidant formula HOW TO INSTALL: HOW TO INSTALL
lands, intake systems, protects against gum SPORTSMAN, Remove wheel and axle nut Remove brake caliper, hub, tie rod, and upper and lower ball joints Remove old boot and clean joint
RANGER, RZR
and combustions and varnish for easy ANGLE DRIVE GEAR 1 2 3 4 5 6
chambers. Helps starting. CASE SYSTEMS
maintain peak HP and
improves fuel economy. » • 502100
» • 502082
Remove wheel and axle nut
Remove old boot and clean joint
Spread silicone lube on entire
Remove brake caliper, hub, tie
Empty the bag of grease into the CV joint/boot,
Reassemble tie rod, ball joints, brake caliper,
Spread included silicone lube onto the entire surface of the cone
ALL–SEASON Remove wheel and axle nut 4 Remove brake caliper, hub, tie rod, and upper and lower ball joints Remove old boot & clean joint 6 tool. Slide boot over cone tool, large end rst. If replacing the outer Empty the bag of grease into Reassemble tie rod, ball joints,
axle nut, tire and wheel
clean sealing points and install clamps
boot, turn boot inside-out before sliding over cone tool onto axle,
5
GREASE TUBE rod, & upper & lower ball joints cone tool. Slide boot over cone the CV joint/boot, clean sealing brake caliper, axle nut, tire & wheel
then pull large end back over small end toward outer joint.
points & install clamps
tool, large end first. See package
*Designed for temporary CV boot repair. Purchase the OEM CV Boot for a permanent repair.
*Proposition 65 Warning: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
for outer boot instructions.
» • 502068 Refer to your owner’s manual for further instructions and torque specifications.
*Designed for temporary CV boot repair. Purchase the OEM CV Boot for a permanent repair.
96 97
Spread included silicone lube onto the entire surface of the cone Empty the bag of grease into the CV joint/boot, Reassemble tie rod, ball joints, brake caliper,
tool. Slide boot over cone tool, large end rst. If replacing the outer clean sealing points and install clamps axle nut, tire and wheel
boot, turn boot inside-out before sliding over cone tool onto axle,
then pull large end back over small end toward outer joint.
*Designed for temporary CV boot repair. Purchase the OEM CV Boot for a permanent repair.
*Proposition 65 Warning: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.